Home » Merchanting » Manufacturers » Redland Monier » Norfolk Pantile

Fixsafe Specification

Standard Profiles

  • Bigsix
  • Cape Fort
  • Cape Monad
  • Doublesix
  • Doublesix M
  • Major Tile
  • Trafford Tile

Other Profiles

  • Cape Trofsec
  • Cape Watford
  • Cembrit B9
  • Compton B5
  • Endurite
  • Eternit Profile 5
  • Eternit Profile 7
  • Gleno 257
  • Standard 3
  • Tegral Coracem Super 4
  • Trafford Tile Liner
  • Turnall Combine

Fixsafe kits contain sheets available in translucent and opaque as direct replacements for asbestos cement profiles that are no longer manufactured. To enhance strength and impact resistance, Fixsafe sheets incorporate additional woven reinforcement. This construction allows sufficient flexibility for easy fixing to existing rigid asbestos cement roofs.

Fixsafe sheeting has no chemical reaction with other established building products.

Under the ACRM drop test, Fixsafe sheets exhibit at least twice the impact strength of standard GRP Translucent sheets.

Fire performance

To meet Building Regulations requirements, sheets tested under BS476 Fire Tests parts 3 & 7 have been classified as: Grade 104 - Designated AA, Rated Class 1.

Operating temperatures

Sheets will not become brittle or soften at low or high Temperatures, typically between -20ºC to +100ºC.

Storage

Loose sheets should be stored on clean, level battens not exceeding 1.5m between centres. Stacks should not exceed 1m high and must not overhang at each end. Secure and protect from wind and mechanical damage. When stored outside, protect with opaque waterproof covers.

Cutting and drilling

Cut sheets with a hacksaw with 6/8 teeth per centimetre. Best results are obtained if the saw is held at a shallow oblique angle. When cutting with power tools use 40/60 grit diamond blade operating at medium speed.

For further information, telephone 01462 755755 and ask for "Fixsafe sales".